ENGLISH >>> Product >>> Photo Resist Meterial
 
FUJIFILM PLOTTER FILM HG NEW HPR-7S
FEATURES Plotter Film HG New HPR-7S is one of the fiIms in Fujifilm's new HQ Systems,It is designed for laser photoplotters equipped with He-Ne lasers or red laser diodes.Our newly developed charged accelerator emulsion technology provides the follow-ing features when used with HQ System developers.
 
 
  1. HG New HPR-7S has sensitivity and contrast suitable for laser photoplotters with He-Ne lasers or red laser diodes to provide images with sharp edges.
  2. HG New HPR--7S is suitable for processing with the Fujifilm HG system developer, which provides high quality and consistent results.
  3. To eliminate false signals with AOI (Automated optical inspection), there is no matte on emulsion side.
  4. The film backing layer has incorporated a newly developed eIectroconductive grain to provide permanent protection from charging.
  5. HG New HPR-7S has wide exposure latitude, allowing accurate reproduction regardless of exposure variations.
6. HG New HPR-7S absorbs less ultraviolet light, allowing the reduction of the exposure time onto the photoresist.
BASE 0.175 mm polyester base
SPECTRAL SENSITlVlTY Red-sensitive
 
SAFELlGHT Use a Fuji Safelight Glass SLG-No.4B (green) w1th a 10 watt lamp, Handle the film at a distance of at least one met6r away from the safelight.
AUTOMATlC This film is suitable for processing in various rapid access automatic processors.
PROCESSlNG  
In order to obtain "HQ performance", it is necessary to use the dedicated deveIoper QR-D1, For fixer, use our Fixer UR-F1. For details, see below.
  Mixing Chemicals:
Chemical
Dilution Ratio (Chemical:Water)
Developer QR-D QR-D1
1:3
Developer Replenisher QR-D1
1:2
Fixer UR-F1
1:2
Fixer Replenisher UR-F1
1:2

You can also use Fuji Developer HR-D1 (chemical: water=1:2)
 
  Processing Conditions:
Step
Chemical
Temperature
Time
Development
QR-D1
32-35(90-95)
30 sec.
Fixing
UR-F1
25-35(77-95)
--
Wash
Running water,5 liters/min.
15-30(59-86)
--
Dry
50(122)
--
 
Developer RepIenishment Rates:
  The standard replenishment rates are indicated below in milliliters per sheet of 50.8 x 61.0 cm size film .
  Developer replenisher QR-D1 ...... 100 ml
  Fixer replenisher UR-F1 ...... 120 ml
MORE >>> >>>
Camera and Recording Film
HCP-7S Film optimized for camera and laser photoplotters equipped with Argon laser,Blue LED,or Green laser,that delivers a sharp,high quality,high-contrast image.>>>
Recording Film
HIR HQ New HQ Recording Film that provides substantially improved image quality and higher dimensional stability for use with imagesetters with an IR laser diode source.
Camera Film
FCS HQ Economical that provides substantitaly improved image quality for general purposes.
Projection Duplicating Film
PDO HQ High-contrast orthochromatic film duplicating halftone or fine negatives and postives.Sensitivity level is most suitable for improser camera.
Contact Film
FKS HR Economical UV-sensitive contact film for superimposition and spread and choke work.