ENGLISH >>> Product >>> Photo Resist Meterial
 
FUJIFLM CAMERA FILM HG HCP-7S
FEATURES Camera Film HG HCP-7S is one of the films in Fujifilm's new HQ System .It is designed for laser photoplotter drawings,contact work,and camera line work.Our newly developed charged accelerator emulsion technolongy provides the following features when used with HQ System developers.
 
 
  1. HG HCP-7S has sensitivity and contrast suitable for laser photoplotters with green He-Ne lasers or argon lasers. It is suitable for use in contact work and camera line work.
  2. HG HCP-7S is suitable for processing with the Fujifilm HQ system developer,which provides high quality and consistent results.
  3. The film backing layer has incorporated a newly developed electroconductive grain to provide permanent protection from charging.
  4. HG HCP-7S has wide exposure latitude,allowing accurate reproduction regardless of exposure variations.
  5. HG HCP-7S absorbs less ultraviolet light,allowing the reduction of the exposure time onto the photoresist.
BASE 0.175mm polyester base
SPECTRAL SENSITlVlTY Orthochromatic
 
SAFELlGHT Use a Fuji Safelight Glass SLG-No.6(dark red) With a 20 watt lamp.Handle the film at a distance of at least one meter away form the safelight.
AUTOMATlC This film is suitable for processing in various rapid access automatic processors.
PROCESSlNG  
In order to obtain "HQ performance",it is necessary to use the developer QR-D1.For fixer,use our Fixer UR-F1.For details,see below.
  Mixing Chemicals:
Chemical
Dilution Ratio (Chemical:Water)
Developer QR-D1
Developer Replenisher QR-D1
Fixer UR-F1
Fixer Replenisher UR-F1
1:3
1:2
1:2
1:2
You can also use Fuji Developer HR-D1 (chemical: water=1:2)
 
  Processing Conditions:
Step
Chemical
Temperature
Time
Development
QR-D1
32-35(90-95)
30 sec.
Fixing
UR-F1
25-35(77-95)
--
Wash
Running water,5 liters/min.
15-30(59-86)
--
Dry
~50(122)
--
 
Developer RepIenishment Rates:
  The standard replenishment rates are indicated below in milliliters per sheet of 50.8 x 61.0 cm size film .
  Developer replenisher QR-D1 ...... 100 ml
  Fixer replenisher UR-F1 ...... 120 ml
MORE >>> >>>
Laser Plotter Film
HPR-7S Film optimized for laser photoplotters equipped with Red LD or He-Ne laser that delivers a sharp high quality image >>>
Recording Film
HIR HQ New HQ Recording Film that provides substantially improved image quality and higher dimensional stability for use with imagesetters with an IR laser diode source.
Camera Film
FCS HQ Economical that provides substantitaly improved image quality for general purposes.
Projection Duplicating Film
PDO HQ High-contrast orthochromatic film duplicating halftone or fine negatives and postives.Sensitivity level is most suitable for improser camera.
Contact Film
FKS HR Economical UV-sensitive contact film for superimposition and spread and choke work.